Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8783891
- Product Categories
- Friendly Links
- home > Supply > Supply high temperature and humidity chamber / constant temperature and humidity tester
Information Name: | Supply high temperature and humidity chamber / constant temperature and humidity tester |
Published: | 2012-06-11 |
Validity: | 365 |
Specifications: | |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | High temperature and humidity chamber / constant temperature and humidity tester Dear customer, hello! Thank you for your concern on high days! We focus on providing the highest quality products and the most attentive service efforts, the following Introduction, welcome to read! Product Name: hot and humid chamber / constant temperature and humidity tester Product Model: GT-TH-225Z High temperature and humidity chamber / constant temperature and humidity tester standard: GB2423.1-89 low temperature test methods GB2423.2-89 high temperature test methods, GB2423-93 test D6 Damp heat test method, IEC68-2-30 Test Method . (A), product size: 1 studio size: 50 × 75 × 60 cm (W × H × D) Second, the temperature and humidity range: Temperature: -40 ° C ~ 150 ° C (can be arbitrarily set) Humidity: 30% ~ 98% RH (can be set arbitrarily) Third, the cooling rate of: At room temperature → 150 ° C for about 35 minutes (non-linear no-load, about 3 ° C / min) At room temperature → -40 ° C for about 55 minutes (non-linear no-load, approximately 1 ° C / min) Four main parameters: 3 The analytic precision: Temperature: ± 0.1 ° C Humidity: ± 0.1% Control accuracy: Temperature: ± 0.3 ° C Humidity: ± 1.5% RH (5) distribution of accuracy: Temperature: ± 1.0 ° C to 100 ℃ ~ 150 ° C: ± 1.5 ℃ Humidity: +2.0 / -3.0% RH Fifth, the product structure: (1) constant temperature and humidity test box of the overall structure, the refrigeration system is located in the box after the lower part of the control system is located in the upper chamber. (2) within the interlayer of the studio end of the duct, the distribution of heaters, refrigeration evaporator, fan and other devices; chamber left with Ф50 cable Kong, the chamber as a single door (stainless steel embedded door handle) (3) double-layer high-temperature aging silicone rubber seal can effectively ensure the loss of the chamber temperature (4) The door is equipped with observation windows, frost prevention device, and switch control of lighting. The observation window with multi-layer insulating tempered glass, the inside of glue chip conductive film heating defrost. Lighting imported brands Philips lamp, can be effective all-round observation of the working chamber of the test changes. |
Admin>>>
You are the 11971 visitor
Copyright © GuangDong ICP No. 10089450, Days test equipment (Dongguan) Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 11971 visitor
Copyright © GuangDong ICP No. 10089450, Days test equipment (Dongguan) Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility